PH10T PLUS
The new PH10T PLUS motorized probe head allows complete, rapid, and repeatable inspection of most complex components with minimum human intervention. Full orientation of your TP2, TP6, TP20 or TP200 probe between any of 720 positions, under manual or program control, turns your 3 axis CMM into a 5 axis machine.
| 2σ positional repeatability | 0.5 μm |
| Cycle time (90° move) | 3.5 seconds |
| Total angular movement | A axis 105° to 0° in 7.5° steps = 15 positions B axis ± 180° in 7.5° steps = 48 positions |
| Totla number of positions | 720 |
| Maximum extension bar length | 300 mm using PEL4 extension |
| Head mounting | Shank to suit your CMM |
| Probe mounting facility | M8 thread |
| Probe head control | PHC10-3 PLUS (purchased seperately) |
| Dimensions | Length 102 mm excluding AM1, width 62 mm |
Adapter/CMM Compatibility
- Probe Head comes with an adapter/shank for your CMM included with the Probe Head.
- Select the appropriate adapter from the selection tool above.
- MS1 = Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, I.T.P., Poli, Portage Machine, Tesa, Zett-Mess.
- MS2 = Boice, Carl Zeiss, Federal Products, Helmel, Kemco, Metrologic, MFO, Mora, Numerex, Real Meca, Starrett, Tokyo-Boeki, Tri-Measures, TSK, Wenzel.
- MS3 = LK Tool (meter 4), Ferranti, Taurus, W & A, Eley & Warren
- MS5 = Ferranti
- MS6 = C.E. Johannson (old specification)
- MS7 = Renault (Seiv), Tri Measures
- MS8 = Olivetti
- MS9 = MTI Corporation (UK)
- MS10 = MTI Corporation
- MS11 = Crown Windley
- MS12 = MTI Corporation (new specification)
- MS13 = DEA Corp
- MS14 = CTA, Real Meca
- MS15 = C.E. Johannson (new specification)
- MS17 = Siefelmayer