PH10M PLUS
The PH10M PLUS motorized probe head has been developed for the new generation of contact and non-contact scanning probes. It has three times the torque of PH10, allowing probe extension bars up to 300 mm long to be used.
| 2σ positional repeatability | 0.5 μm |
| Cycle time (90° move) | 3.5 seconds |
| Total angular movement | A axis 105° to 0° in 7.5° steps = 15 positions B axis ± 180° in 7.5° steps = 48 positions |
| Totla number of positions | 720 |
| Maximum extension bar length | 300 mm using PAA3 extension |
| Head mounting | Shank to suit your CMM |
| Probe mounting facility | Autojoint |
| Probe head control | PHDC10-3 (purchased seperately) |
| Dimensions | Length 102 mm excluding AM1, width 62 mm |
Compatible with Motorized and Manual.
PH10M PLUS Probe Head
- AM1: Adjustment Module
- Probe Interface: PI 4-2
- Probe Interface: PI 200
- Probe Interface: PI 7-2
- PEL M8 to M8 Aluminum Extensions (Requires PAA Adapter)
- PAA3 Autojoint to M8 Aluminum Extensions, 140/300 mm length
- Mounting Lug: Ø0.375
Adapter/CMM Compatibility
- Probe Head comes with an adapter/shank for your CMM included with the Probe Head.
- Select the appropriate adapter from the selection tool above.
- MS1 = Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, I.T.P., Poli, Portage Machine, Tesa, Zett-Mess.
- MS2 = Boice, Carl Zeiss, Federal Products, Helmel, Kemco, Metrologic, MFO, Mora, Numerex, Real Meca, Starrett, Tokyo-Boeki, Tri-Measures, TSK, Wenzel.
- MS3 = LK Tool (meter 4), Ferranti, Taurus, W & A, Eley & Warren
- MS5 = Ferranti
- MS6 = C.E. Johannson (old specification)
- MS7 = Renault (Seiv), Tri Measures
- MS8 = Olivetti
- MS9 = MTI Corporation (UK)
- MS10 = MTI Corporation
- MS11 = Crown Windley
- MS12 = MTI Corporation (new specification)
- MS13 = DEA Corp
- MS14 = CTA, Real Meca
- MS15 = C.E. Johannson (new specification)
- MS17 = Siefelmayer